Supports 48 SPTS or MPTS IP-in streams max 950 Mbit
The license can be purchased online at the link: https://www.triax.com/order-tdmh-tdch-licence/
Number of IP input streams
Max 48 SPTS/MPTS UDP/RTP Multicast Streams
Data interface
1 x 1000 Base-T SFP or Fibre SFP ; 1000BaseX (SerDes) mode
Protocols
- IEEE802.3 Ethernet
- SPTS/MPTS Streaming (VBR) including PAT, PMT. Optional tables: SDT, CAT and EIT
- Multicast UDP and RTP MPEG Transport Stream
- NOTE: If SDT does not exist then will the service name is set to “service_x” (where x = SID) in the GUI and at the output. The service can be renamed at the output page in the GUI.
IP-FEC
No
Ethernet IP packet format
MPEG2 (ISO/IEC 13818-1) over UDP/IP und RTP/IP
IP-Packet size
1-7 x 188-byte TS packets pr. IP packet
IP-Bitrate
Max. 950 Mbit/s at SFP interface for all Multicast Streams
Routing
The IP-input can be routed to CAM, Scrambler and QAM/COFDM/IP outputs.
EIT
Inside the SPTS/MPTS Multicast Stream for current service(s) or via alternative source (another configured Multicast Stream) NOTE: If the EIT is received via alternative source then the SID must be unique for all services received via this alternative source.
IGMP
Supports IGMPv2. If Source is specified in the GUI then is IGMPv3 with SSM (Source Specific Multicast) supported. NOTE: Only one multicast can be received pr. IP-address & port -> It is not possible to setup different sources at same IP address & ports.